It likes the onboard video system or low end video card in mb or less. There is no need to install drivers if the cards and hardware is supported it will work. Then once you see the DD-wrt Screen boot up with a prompt. Connect a working computer by a 5 port or 8 port switch or a router with its DHCP turned off so it functions like a switch. Then try one of the lan adapters and access its Webgui page at It will let you access its setup page if you want to use it like a router enable WAN on the setup page and then go to save and apply and reboot your modem while rebooting the DD-wrt system.
Once everything is completed booting up you should have working internet. Posted: Fri Jan 18, Post subject:. You do not put a router between your modem and DD-wrt system.
I have attached a picture on how its supposed to be setup. If you need more help just leave a reply. Hi flood I just received notice of your post. The diagram straightens out a lot of the issues I did not understand. Thank you. I have been side tracked on another project and haven't spent much time on this one. I can now get back to it and I totally understand the diagram.
In the version list 3 , select "recommended" or, if not found, select the default one. Different types of firmware are available according to the router model. Other types of firmware, like Mini or Micro, are unsuitable since they do not have a Hotspot module chillispot.
Carefully read the Additional Information field 2 that contains additional information on firmware installation. With this router database we want to give to the users a simple tool that allows an instant search for the routers and a fast solution for finding more information and the related downloads.
We hope you like it - feel free to give us feedback and suggestions. For those looking for a complete list or search features by hardware specs we are working on extending the router database to provide these features. But please take care - everybody can edit the information there so we cannot prove that they are correct in every case. Step 8 - Go to another computer and open a web browser to This is the easiest way to get up and running using hard drive.
Connect the hard drive that will be used for dd-wrt to a windows machine either with usb or internal. Put both physdiskwrite and dd-wrt image file in drive c: or whatever your main drive is. Click Start and then Run, type "command" in the open box and click open to bring up a command prompt. At command prompt navigate to where physdiskwrite is located. Use command "dir" to list directory contents and verify that both files are there.
The -u tag is used for large drives. Next you will select drive to apply the image to.
0コメント