Listen [::] Default charset UTF8. AddDefaultCharset utf To be able to use the functionality of a module which was built as a DSO you. If you wish httpd to run as a different user or group, you must run. It is usually good practice to create a dedicated user and group for. The directives in this section set up the values used by the 'main'. These values also provide defaults for. ServerAdmin: Your address, where problems with the server should be. This address appears on some server-generated pages, such.
ServerAdmin postmaster localhost. ServerName gives the name and port that the server uses to identify itself. This can often be determined automatically, but we recommend you specify. ServerName localhost DocumentRoot: The directory out of which you will serve your. By default, all requests are taken from this directory, but. Each directory to which Apache has access can be configured with respect.
First, we configure the "default" to be a very restrictive set of. Options FollowSymLinks. AllowOverride None. Order deny,allow. Deny from all. IE 64 bit make problems without this. AcceptFilter http none. Note that from this point forward you must specifically allow.
This should be changed to whatever you set DocumentRoot to. Possible values for the Options directive are "None", "All",. The Options directive is both complicated and important. Please see. AllowOverride controls what directives may be placed in. It can be "All", "None", or any combination of the keywords:. AllowOverride All. Controls who can get stuff from this server. Order allow,deny. Allow from all. DirectoryIndex: sets the file that Apache will serve if a directory.
DirectoryIndex index. The following lines prevent. Require all denied. ErrorLog: The location of the error log file. Possible values include: debug, info, notice, warn, error, crit,. The following directives define some format nicknames for use with. The location and format of the access logfile Common Logfile Format.
If you prefer a logfile with access, agent, and referer information. Combined Logfile Format you can use the following directive. Redirect: Allows you to tell clients about documents that used to. The intent is that this external program first runs security checks to make sure that the system is not compromised by an attacker, and only when these checks were passed successfully it provides the Pass Phrase.
Both these security checks, and the way the Pass Phrase is determined, can be as complex as you like. Nothing more or less! So, if you're really paranoid about security, here is your interface. Anything else has to be left as an exercise to the administrator, because local security requirements are so different. The reuse-algorithm above is used here, too. In other words: The external program is called only once per unique Pass Phrase. It is supported by nearly every client. A revision of the TLS 1.
Before OpenSSL 1. For compatibility with previous versions, if no SSLProtocol is configured in a name-based virtual host, the one from the base virtual host still applies, unless SSLProtocol is configured globally in which case the global value applies this latter exception is more sensible than compatible, though. This directive sets the all-in-one file where you can assemble the Certificates of Certification Authorities CA whose remote servers you deal with.
These are used for Remote Server Authentication. This directive sets the directory where you keep the Certificates of Certification Authorities CAs whose remote servers you deal with. These are used to verify the remote server certificate on Remote Server Authentication.
Enables certificate revocation list CRL checking for the remote servers you deal with. With the introduction of this directive, the behavior has been changed: when checking is enabled, CRLs must be present for the validation to succeed - otherwise it will fail with an "unable to get certificate CRL" error. These are used to revoke the remote server certificate on Remote Server Authentication. This directive sets whether the remote server certificate's CN field is compared against the hostname of the request URL.
If both are not equal a status code Bad Gateway is sent. In all releases 2. In these releases, both directives must be set to off to completely avoid remote server certificate name validation. Many users reported this to be very confusing. As of release 2. Only the following configuration will trigger the legacy certificate CN comparison in 2. This directive sets whether it is checked if the remote server certificate is expired or not.
If the check fails a status code Bad Gateway is sent. The check will succeed if the host name from the request URI matches one of the CN attribute s of the certificate's subject, or matches the subjectAltName extension. This feature was introduced in 2. This directive sets the all-in-one file where you keep the certificate chain for all of the client certs in use.
This directive will be needed if the remote server presents a list of CA certificates that are not direct signers of one of the configured client certificates. This referenced file is simply the concatenation of the various PEM-encoded certificate files.
Upon startup, each client certificate configured will be examined and a chain of trust will be constructed. This directive sets the all-in-one file where you keep the certificates and keys used for authentication of the proxy server to remote servers. The referenced file can contain any number of pairs of client certificate and associated private key.
Each pair can be specified in either certificate, key or key, certificate order. If the file includes any non-leaf certificate, or any unmatched key and certificate pair, a configuration error will be issued at startup. When challenged to provide a client certificate by a remote server, the server should provide a list of acceptable certificate authority names in the challenge.
The first configured matching certificate will then be supplied in response to the challenge. Keys encoded in PKCS8 format, ie. This directive sets the directory where you keep the client certificates and keys used for authentication of the proxy server to remote servers.
It will only connect to servers using one of the provided protocols. Please refer to SSLProtocol for additional information. When a proxy is configured to forward requests to a remote SSL server, this directive can be used to configure certificate verification of the remote server.
The depth actually is the maximum number of intermediate certificate issuers, i. A depth of 0 means that self-signed remote server certificates are accepted only, the default depth of 1 means the remote server certificate can be self-signed or has to be signed by a CA which is directly known to the server i.
This directive can only be used in the global server context because the PRNG is a global facility. This is the always available builtin seeding source.
Its usage consumes minimum CPU cycles under runtime and hence can be always used without drawbacks. The source used for seeding the PRNG contains of the current time, the current process id and a randomly chosen bytes extract of the stack. The drawback is that this is not really a strong source and at startup time where the scoreboard is still not available this source just produces a few bytes of entropy.
So you should always, at least for the startup, use an additional seeding source. The drawback is just that the quality of the received data may not be the best.
When bytes is specified, only the first bytes number of bytes of its stdout contents form the entropy. When bytes is not specified, the entirety of the data produced on stdout form the entropy.
Using this in the connection context slows down the server too dramatically, of course. So usually you should avoid using external programs in that context. Use this if no random device exists on your platform. This directive can be used to set the amount of memory that will be used for this buffer.
Note that in many configurations, the client sending the request body will be untrusted so a denial of service attack by consumption of memory must be considered when changing this configuration setting. SSLRequire is deprecated and should in general be replaced by Require expr. For the latter, there are also aliases without the leading dashes: lt , le , This directive specifies a general access requirement which has to be fulfilled in order to allow access. It is a very powerful directive because the requirement specification is an arbitrarily complex boolean expression containing any number of access checks.
For varname any of the variables described in Environment Variables can be used. The expression is parsed into an internal machine representation when the configuration is loaded, and then evaluated during request processing. The expression evaluates to true if the left-hand side string matches exactly against the value of an extension identified with this OID. If multiple extensions with the same OID are present, at least one extension must match.
Expressions with types known to the SSL library are rendered to a string before comparison. For an extension of one of these types, the string value will be converted to UTF-8 if necessary, then compared against the left-hand-side expression.
HTTPS is enabled for the current connection. This is very handy inside the SSL-enabled virtual host or directories for defending against configuration errors that expose stuff that should be protected. When this directive is present all requests are denied which are not using SSL. This cache is an optional facility which speeds up parallel request processing. But because modern clients request inlined images and other data via parallel requests usually up to four parallel requests are common those requests are served by different pre-forked server processes.
Here an inter-process cache helps to avoid unnecessary session handshakes. This will incur a noticeable speed penalty and may cause problems if using certain browsers, particularly if client certificates are enabled.
This setting is not recommended. This session cache may suffer reliability issues under high load. This makes use of a high-performance cyclic buffer approx. This is the recommended session cache. This makes use of the distcache distributed session caching libraries.
The ssl-cache mutex is used to serialize access to the session cache to prevent corruption. This mutex can be configured using the Mutex directive. But what many gamers are not aware of is the fact that these mod menus come with a lot of risk factors. And yes, many users do find themselves in a pickle with their accounts banned and abundant money and time wasted.
Unlike the majority of mod menus offered by shady websites, the mod itself is among the safest and popular tools on the market. The majority of the popular mod menus and cheats for GTA 5 became useless and discontinued with the newest update of the game. It has not only continued to work but also constantly offers its users the best services in the form of efficient cheats. The tool enhances the gaming experience of its users by offering them a way out. It also boosts their skills in the game through its wide variety of endless and efficient features.
While its users remain busy and rank up in the game, the tool stays undetected and is able to avoid anti-cheat systems. The tool is safe for all GTA 5 gamers to use. The tool efficiently works with the updated version of GTA 5.
The developers of the mod menu ensures that the tool remains updated and keeps up with all the newest developments with the game. But the features of these tools do not even compare to those offered by Kiddion. The tool itself does not house any type of infected code or malicious content. Thus, it is safe, and the tool is very easy to use.
Version: 1.
0コメント